AllevaSole Pro Red Light Foot and Ankle Therapy

AllevaSole Pro Red Light Foot and Ankle Therapy

Utilizing 660 nm red light LEDs alongside 850 nm near-infrared frequencies, AllevaSole Pro is designed to revitalize tired feet after long days. With its universal design, the wrap fits all foot sizes, thanks to a thoughtful heel cutout that targets key areas for optimal therapy.

Includes

One (1) AllevaSole Pro Red Light Foot and Ankle Therapy device
One (1) USB-C charging cable
One (1) USB power adapter plug
User manual

Features

Designed to alleviate discomfort in the ankles, elbows, and feet
Offers powerful, effective results without direct skin contact, as its wavelengths can penetrate through the foot
Red light therapy helps stimulate circulation, promoting healthier feet naturally
One size fits most
Takes approx. 4 hours to fully charge
Made with neoprene
Measures 19.68” x 4.15” x 3.9”
Weighs 0.66 lbs

How to Use

Remove the AllevaSole Pro from the shipping box and inspect all items for shipping damage
Carefully read all safety warnings and operating instructions before using the AllevaSole Pro
Do a skin sensitivity test following the instructions on page 8. Then complete the steps in the easy-start setup guide on pages 10–11 to begin using the AllevaSole Pro
Charging the AllevaSole Pro:
- Always make sure the AllevaSole Pro is powered off before charging
- Plug the smaller USB-C end of the charging cable into the O5B-C port on the bottom edge of the battery pack
- Plug the larger USB end of the charging cable into the included power adapter
- Plug the power adapter plug into a wall outlet. The digital screen on battery will show the battery capacity to indicate the device is charging
- Charge for 3–4 hours, until the digital screen on battery shows 100%, indicating a full charge
- Disconnect the charging cable
Preparing to use the AllevaSole Pro:
- Remove your socks and roll up your pant legs. Red light therapy is most effective over bare skin
- Remove any metal jewelry or metal accessories (snaps, buttons, zippers, jewelry, etc.) from the treatment area
- Wash and dry your foot thoroughly to keep the inside of the device clean
- Find a comfortable place to sit or lie down
Using the AllevaSole Pro:
- Secure the AllevaSole Pro to your foot. See instructions on page 12
- Press and hold the on/pulse/off button on the control panel for 2 seconds to turn on the AllevaSole Pro. The display screen will light up and show "20," indicating the default working time of 20 minutes
- Use the device for 3–5 minutes. It's a good idea to start with a shorter working time when you are first using the AltevaSole Pro
- Press and hold the on/pulse/off button for 2 seconds to turn off the AllevaSole Pro if stopping the treatment before the 20-minute working time ends

Care Instructions

Use only over clean clothing or skin to keep the device clean
Turn off, unplug, and allow the device to cool down before cleaning or storing
Wipe the device with a soft, slightly damp cloth after each use. If needed, you may wipe the device with an alcohol-based wipe. Allow the device to completely dry before using again
Do not use soap, detergent, or abrasive, corrosive, solvent, or chemical cleaners or harsh detergents to clean the device
Do not wash the device in a washing machine
If debris or hair gets caught in the Velcro hook and loop fasteners, use a toothpick to remove
Store the device in a cool, dry, indoor location