JumpSmart Vehicle Jump Starter & 10-in-1 Multi-Tool

Limitless Innovations

JumpSmart Vehicle Jump Starter & 10-in-1 Multi-Tool

The JumpSmart 10-in-1 is a user-friendly multi-tool that includes a powerful 8,000 mAh 4-cell battery that powers a vehicle jump starter, 4-mode flashlight with an emergency red flashing light, 2-port USB power bank, and an audible safety alarm. Additional useful features include a compass, thermometer, reflector, and carrying strap. Its IP65 water/dust resistant rating makes it safe for use in the elements. JumpSmart is powerful enough to jump start most cars, trucks, SUVs, boats, motorcycles, lawn mowers, ATVs, and more!

Includes

One (1) JumpSmart Vehicle Jump Starter & 10-in-1 Multi-Tool in color of your choice
One (1) set of Smart Jumper Cables with mini flashlight
One (1) carrying bag with printed instructions
One (1) USB wall charger
One (1) USB car charger
One (1) micro USB cable
User manual

Features

10-in-1 multi-tool that includes:
- Jump starter:
  - Powerful enough to jump start up to V8, 7.0 L (4.0 L diesel) cars, trucks, SUVs, boats, motorcycles, lawn mowers, ATVs, and more
  - Instantly jump a drained vehicle battery by clamping the Smart Jumper Cables directly onto the vehicle battery terminals
  - 8000 mAh high-grade Lithium-Polymer battery with DC 12V 200A (start)–800A (peak)
- Power bank: Dual USB ports provide optional charge, up to 2.4 amps per port, for fast charging for USB-chargeable devices
- LED flashlight:
  - 8W, 330 lumen
  - Four modes: High Beam, Low Beam, S.O.S., Strobe
  - 495 ft reach
- Emergency red flashing light
- Audible safety alarm
- Thermometer
- Compass
- Reflector
- Carrying strap
- IP65 water/dust resistant rating
Has 10 built-in safety checks with audible alarms and visual safety indicator lights to warn of an improper connection
Lightweight and portable
User-friendly
Rubberized knurled grip
Ideal for daily use, traveling, outdoor activities, and in emergency situations
Charging time: approx. 3–4 hours
Made of PC + ABS plastics / TPU
Measures 10” x 2.5” x 2.5”
Weighs 1.14 lbs

How to Use

To prevent potential product damage, property damage, personal injury, or even loss of life, read all Safety Warnings located in the “Safety Information” section of the User Manual before attempting to operate the JumpSmart and its accessories
Charging the JumpSmart:
- It is recommended to recharge the JumpSmart after each use for optimal performance. The JumpSmart should be recharged every three months regardless of usage amount
- Remove the end cap from the back panel of the JumpSmart. Plug the micro USB cable into the micro input on the back panel
- If using the USB wall charger:
  - Plug the USB wall charger into a standard 110V AC wall outlet
  - Plug the opposite end of the micro USB cable into the USB port of the wall charger
- If using the USB car charger:
  - Plug the USB car charger into a standard 12V vehicle power socket
  - Plug the opposite end of the micro USB cable into the USB port of the car charger
Using the jump starter:
- Plug the Smart Cable box into the jump starter port located on the back panel of the JumpSmart
- Once plugged in correctly, the green and red safety indicator lights will flash in an alternating pattern on the Smart Cable box. The Smart Cables can now be connected to the battery terminals
- Tip: Use the Smart Cable mini flashlight located on the end of the Smart Cable box to shine light on the battery terminals
- Connect the red clamp of the Smart Cables to the positive terminal of the vehicle battery
- Connect the black clamp of the Smart Cables to the negative terminal of the vehicle’s battery. Once both the positive and negative clamps are properly connected, the green safety indicator light on the Smart Cable will remain illuminated. The vehicle is now ready to be started
- Once the vehicle has been successfully started, proceed to remove the jumper cables in the reverse order that they were attached, beginning with the black jumper cable
- If the vehicle does not start after the first attempt, disconnect the Smart Cables from the JumpSmart and wait at least 60 seconds before repeating steps 1–4
- Do not attempt to jump start a vehicle more than three times. If the vehicle battery does not start after the third try, consult a certified mechanic
Using the flashlight:
- Single click the power button to turn on. It will be in High Mode
- Single click the power button to scan through the flashlight modes
- To turn off without scanning through the modes, press and hold the power button for approx. 3 seconds
- To use the red flashing light: Press and hold the power button for approx. 3 seconds to turn the red flashing light on. Press and hold the power button again to turn the red flashing light off
Using the power bank:
- Remove the end cap from the back panel of the JumpSmart. Plug a USB cable into one of the USB charging ports (output)
- The Battery Capacity indicator lights will illuminate if properly connected and ready to use
- Plug the opposite end of the USB cable into a mobile device. The device will begin to charge
Using the audible safety alarm: Remove the end cap from the back panel of the JumpSmart. Press the S.O.S. power button to activate the alarm. Press the S.O.S. power button again to deactivate the alarm
Using the compass:
- With the end cap attached, hold the JumpSmart in a vertical position directly in the front and center of your body, or stand the JumpSmart on a flat surface for a more accurate reading
- The compass will adjust to point to the magnetic north and display the current direction
Using the thermometer: It will automatically indicate the current temperature. For an accurate reading, place the JumpSmart out of direct sunlight and wait approx. 5 minutes for the thermometer to acclimate

Care Instructions

Store the JumpStart in a cool, dry place
Batteries are affected by temperature. The ideal storage temperature is 70° F (21° C)
Note: If the JumpSmart is exposed to extreme temperatures (-4° F, 140° F+ / -20° C, 60° C+), it is recommended to allow the JumpSmart to reacclimate to the ideal temperature of 70° F before using